This is an old revision of the document!
LoTHR mini Electronics Soldering Station
Parts
-
- Backside Switch re-used on front
- old external SCSI HDD Case
- 2x 5pin Jumper-Wire Jack
- Switching power supply 24V / 3.2A, set to ~27V
Photos
Front
The front was lasercut to accommodate the different devices.
- Black: cut with 100% 60W at 7mm/s
- Red: scan-engraved with 12% 60W at 100mm/s
Todo
realraum Graz, Brockmanngasse 15, 8010 Graz, realraum - Verein für Technik in Kultur und Gesellschaft