✎ roomauto:mqtt_topics [realraum]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== r3 MQTT Topics ======

A go-module and exact definitions of current r3events can be found at github: https://github.com/realraum/door_and_sensors/tree/master/r3events

A guide on mqtt essentials: http://www.hivemq.com/blog/mqtt-essentials-part-5-mqtt-topics-best-practices

==== Broker ====
**mqtt.realraum.at:1883** (reachable only in local realraum network)

==== Topics currently in use ====

Topics can be retained by the message broker. In this case, the most recent event for that topic is sent to a client immediately upon subscription of that topic.

^Topic^Retain^Description|
^Sensor Messages^| |
|realraum/frontdoor/lock|True|Frontdoor locked or not|
|realraum/w2frontdoor/lock  |True|w2 door locked or not|
|realraum/frontdoor/ajar|True|Frontdoor ajar or shut|
|realraum/w2frontdoor/ajar|True|w2 door ajar or not|
|realraum/frontdoor/cmdevt|False|Command that was sent to the frontdoor and by whom|
|realraum/frontdoor/problemevt|False|Problem that occured at the frontdoor|
|realraum/frontdoor/manuallockmovement|True|If the frontdoor was locker / unlocked by hand|
|realraum/frontdoor/rawfwlines|False|raw communication between door_client and door_daemon|
|realraum/smallkiosk/temperature|True|LoTHR Temperature, DHT11 Sensor|
|realraum/smallkiosk/relhumidity|True|LoTHR Humidity, DHT11 Sensor|
|realraum/printerbone/temperature|True|Tesla R1W2 BMP180 Sensor|
|realraum/printerbone/barometer  |True|Tesla R1W2 BMP180 Sensor|
|realraum/pillar/boredoombuttonpressed|False|indicates the BoreDOOOOOOMButton has been pressed|
|realraum/pillar/illumination|True| |
|realraum/pillar/dust|True|currently nonexistant Dust Sensor|
|realraum/pillar/movement|False|PIR Movement Sensors on Arduino on Beaglebone in LoTHR, one event per detected movement|
|realraum/xbee/relhumidity|True|XBee non-fixed sensors humidity, DHT11|
|realraum/xbee/temperature|True|XBee non-fixed sensors temperature, DHT11|
|realraum/xbee/voltage|True|XBee non-fixed sensors battery voltage|
|realraum/w2tesla/relhumidity|True|sensors humidity, DHT11 in R2W2|
|realraum/w2tesla/temperature|True|temperature, DHT11 in R2W2|
|realraum/backdoorcx/movement|False|currently nonexistant future PIR Movement Sensor in CX|
|realraum/olgafreezer/temperature|False|OlgaFreezer DS18B20 Temp Sensors|
|realraum/olgafreezer/overtemp|False|Alarm Event, triggered if Temperature exceeds a pre-set limit (see [[https://github.com/realraum/door_and_sensors/blob/master/scripts/olga_freezer_sensordata_forwarder.py|olga_freezer_sensordata_forwarder.py]] )|
|realraum/olgafreezer/sensorlost|False|Triggered if a olgafreezer sensor stopped transmitting data|
|realraum/backdoorcx/temperature|True|Temperature in CX, between Network, Backdoor and WC|
|realraum/backdoorcx/lock|False|no sensor, does not exist|
|realraum/backdoorcx/ajar|True|Backdoor Ajar Sensor|
|realraum/backdoorcx/gasalert|False|Sent if LPG/Gas-Alert on CX-Ceiling is triggered|
|realraum/backdoorcx/powerloss|False|Sent if UPS connected to ''smsgw.realraum.at'' reports powerloss, power-regained or change in battery charge|
|realraum/gateway/NetDHCPACK|False|not-implemented. Info about new DHCP client in network.|
|realraum/gateway/NetGWStatUpdate|True|not-implemented. **TODO** ((equinox doesn't like this™ so may never be implemented)) . regular updated network statistics|
|realraum/lasercutter/cardpresent|True|indicateds if and who's card actives the lasercutters's laser|
|realraum/w2frontdoor/online|True|indicates ip of device and if online or offline (LastWill)|
|action/ceilingN/online|True|indicates ip of device and if online or offline (LastWill)|
^Meta Events^| |
|realraum/metaevt/presence|True|Indicates if someone is present in realraum. Sent everytime presence status changes. .Meta-Event generated by 'r3-metaevt-maker'|
|realraum/metaevt/overtemp|False|Meta-event triggered if a temperature sensor exceeds a warning threshold|
|realraum/metaevt/sensorlost|False|Meta-event triggered if a sensor stopped transmitting data|
|realraum/metaevt/realmovement|False|Tries to distinguish between real movement and spurious sensor errors|
|realraum/metaevt/duskordawn|False|Meta-event that indicates Sunset, Sunrise, astronomical dawn, nautical dawn, civil dawn.|
|realraum/metaevt/TempSensorSpike|False|not-implemented. **TODO**. Meta-event that triggers if a temperature sensor's value rises above its running average standard deviation –> possible Fire|
|realraum/metaevt/DustSensorSpike|False|not-implemented. **TODO**. Meta-event that triggers if a dust sensor's value rises above its running average standard deviation –> possible Fire|

^Action Requests^| |
|action/rf433/sendcode3byte|False|Tell RF433 Transmitters to transmit the attached 3byte code over the air to powerplugs|
|action/rf433/setdelay|True|Tell Sender at *Location X* to wait *DelayMs* until sending a command receivce via ''sendcode3byte'' ((currently not used, even though implemented))  |
|action/yamahastereo/ircmd|False|Send command to ir-emitter for yamaha stereo ([[https://github.com/realraum/door_and_sensors/blob/master/scripts/arduinosensors.py|list of named commands]])|
|action/PipeLEDs/pattern|False|Select pattern of Pipe LED stripe|
|action/PipeLEDs/restart|False|Restart ESP8266 controlling pipe LEDs|
|action/ceiling1/light|False|Set R,G,B,CW,WW Value of ceiling1|
|action/ceiling2/light|False|Set R,G,B,CW,WW Value of ceiling2|
|action/ceiling3/light|False|Set R,G,B,CW,WW Value of ceiling3|
|action/ceiling4/light|False|Set R,G,B,CW,WW Value of ceiling4|
|action/ceiling5/light|False|Set R,G,B,CW,WW Value of ceiling5|
|action/ceiling6/light|False|Set R,G,B,CW,WW Value of ceiling6|
|action/flooddoor/light|False|Set R,G,B,CW,WW Value of ceiling7 flodder|
|action/abwasch/light|False|Set R,G,B,UV,WW Value of ceiling8 flodder|
|action/ceilingAll/light|False|Set R,G,B,UV,CW,WW Value of all ceiling lights|
|action/gonamectrl/name|False|Switch named thing on/off|
|action/ceilingscripts/activescript|Falsce|active script with options '{script:name,…}'|
|action/GoLightCtrl/basiclight1|False|switch basiclight on/off|
|action/GoLightCtrl/basiclight2|False|switch basiclight on/off|
|action/GoLightCtrl/basiclight3|False|switch basiclight on/off|
|action/GoLightCtrl/basiclight4|False|switch basiclight on/off|
|action/GoLightCtrl/basiclight5|False|switch basiclight on/off|
|action/GoLightCtrl/basiclight6|False|switch basiclight on/off|

----

\\


===== Structure of Topics =====
''level0/level1/level2/level3/....''

^Level ^ Content ^
| 0  | ''realraum'' (indicates sensor information) or \\ ''action'' (indicates a request for action) |
| 1  | clientID. Either ID of sender (if topic[0] == ''realraum'') or ID of recipient (if topic[0] == ''action'') \\ Future use: access restrictions for topics of ''+/clientid/#'' to senders with the correct clientid |
| 2  | uniquely identifies the type and **format** of the payload. E.g. means is directly maps to a certain json object structure |
| 3  | discouraged, but could be used to distinguish between several types of sensors of the same type at the same location, subcommands, etc |

== Reasons ==
  * eg.:to get all temperature sensors in realraum, subscribe to: "realraum/+/temperature" \\ e.g. mosquitto does not support wildcards subscriptions of the type "realraum/#/temperature", which means message content/format should always be at level 2
  * "realraum/" should be at the front, since other hackerspaces MQTT sensors can also be subscribed to. e.g. "devlol/", or "metalab/"
  * having the message format indicated in the topic makes parsing easier
  * having the clientID in the topic makes access control easier, e.g. only that clientid can publish to this topic

==== Clients\\ aka 1st level topics ====
^ ClientID ^ on Host ^ Description ^ Network Requirements ^ Image ^
| frontdoor | [[intern:ip-adressen|torwaechter.mgmt.realraum.at]] | ALIX Board mounted on the front door | LAN\\ mqtt.realraum.at\\ DNS |  {{:roomauto:frontdoor_torwaechter.realraum.at.jpg?200|}} |
| backdoorcx| [[intern:ip-adressen|mqtt.realraum.at]]| MinimusAVR connected to ''smsgw.realraum.at'' and running ''backdoorcx_sensor_node'' binary. Located in CX/Network | LAN\\ mqtt.realraum.at\\ DNS |  {{:roomauto:backdoorcx_mqtt.realraum.at.jpg?200|}} |
| GoLightCtrl | [[intern:ip-adressen|licht.realraum.at]] | RaspberryPi serving http://licht.realraum.at/switch.html site and sending ''action/rf433/sendcode3byte''  mqtt messages. Listens to topics like ''action/GoLightCtrl/basiclight1'' Sits on top shelf next to beamer in LoTHR. Connected to Ceilinglightcontrolbuttons. | LAN\\ mqtt.realraum.at\\ DNS\\ provides HTTP licht.realraum.at |  {{ :roomauto:golightctrl_licht.realraum.at.jpg?200|}} |
| ventilation | [[intern:ip-adressen|ventilation.realraum.at]] | RaspberryPi with Touchscreen controlling Ventilation and serving http://lüftung.realraum.at/ and sending ''realraum/ventlation/ventstate'' mqtt messages. Listens to lasercutter | LAN\\ mqtt.realraum.at\\ DNS\\ provides HTTP ventilation.realraum.at |  {{:roomauto:ventilation_ventilation.realraum.at.jpg?200|}} |
| pillar | [[intern:ip-adressen|kiosk1.realraum.at]]| arduinosensor.py script running on RPi2 ''kiosk1.realraum.at'', located between pillar in LoTHR and the window glas. | LAN\\ internet for kiosk\\ mqtt.realraum.at\\ DNS |  {{:roomauto:pillar_kiosk.realraum.at.jpg?200|}} |
| smallkiosk | [[intern:ip-adressen|smallkiosk.realraum.at]]| dht11sensor.py script running on RPi1 ''smallkiosk.realraum.at'', which is the small display next to the passage from LoTHR to CX | LAN\\ mqtt.realraum.at\\ DNS\\ Internet for Kiosk |  {{:roomauto:smallkiosk_smallkiosk.realraum.at.jpg?200|}} |
| xbee | [[intern:ip-adressen|smsgw.realraum.at]]| xbeesensor.py script running on RasperriPi ''smsgw.realraum.at'', connects to XBEE temperature and humidity sensors outside or cellar | LAN\\ mqtt.realraum.at\\ DNS |  {{:roomauto:xbee_smsgw.realraum.at_1.jpg?410 |}} |
| olgafreezer | [[intern:ip-adressen|olgafreezer.realraum.at]]| Arduino+NetworkShield POE-powered TemperatureDisplay next to freezer in OLGA. smsgw.realraum.at runs a sensornode called ''olga_freezer_sensordata_forwarder.py'' | LAN\\ accessible from wherever ''olga_freezer_sensordata_forwarder.py'' runs |  {{:roomauto:olgafreezer_mqtt.realraum.at.jpg?200|}} |
| metaevt | [[intern:ip-adressen|mqtt.realraum.at]]| Metaevents generated from other events by ''r3-metaevt-maker'' binary running on ''mqtt.realraum.at'' | LAN\\ mqtt.realraum.at\\ DNS |  {{:roomauto:backdoorcx_mqtt.realraum.at.jpg?200|}} |
| w2tesla  | [[:ip-addressen|w2tesla.mgmt.realraum.at]] | Temp/Humidity DHT11 Sensor in Tesla's PowerPlugBar | mgmtWIFI\\ mqtt.realraum.at\\ DNS |  {{:roomauto:w2tesla_w2tesla.mgmt.realraum.at.jpg?200|}} |
| w2frontdoor | ? | bsod built ESP8266 sensor sensing if the flat-door to flat2/Wohnung2 is locked or not | mgmtWIFI\\ mqtt.realraum.at\\ DNS |  {{:roomauto:frontdoorw2_dhcp.jpg?200}}{{:roomauto:frontdoorw2_dhcp_mechanics.jpg?200|}} |
| gateway | [[intern:ip-adressen|gw.realraum.at]]| ALIX board ''gw.realraum.at'', located in CX/Network, runs NO sensors | all? |  {{:roomauto:gateway_gw.realraum.at.jpg?200|}} |
| lasercutter | [[intern:ip-adressen|lasercutter.mgmt.realraum.at]]| RaspberryPI1 used for accesscontrol to the lasercutter. Mounted on the lasercutter. | mgmtWIFI\\ mqtt.realraum.at\\ DNS\\ provides ssh |  {{:lasercutter:lasercutter_zeit_und_karte.jpg?200|}} |
| xmppbot | [[intern:ip-adressen|mqtt.realraum.at]]| The binary ''r3-xmppbot'' running on ''mqtt.realraum.at''. Possible future backchannel for xmpp-bot | LAN\\ mqtt.realraum.at\\ DNS\\ idl.wirdorange.org or wherever xmpp:realraum.at runs |  {{:roomauto:backdoorcx_mqtt.realraum.at.jpg?200|}} |
| r3-spaceapistatus | [[intern:ip-adressen|mqtt.realraum.at]]| The binary ''r3-spaceapistatus'' running on ''mqtt.realraum.at''.  | LAN\\ mqtt.realraum.at\\ DNS\\ ssh to vex.realraum.at \\ provides http:8080/json as future alternative to ssh-out |  {{:roomauto:backdoorcx_mqtt.realraum.at.jpg?200|}} |
| rf433 | [[intern:ip-adressen|kiosk.realraum.at]]| Action Destination for rf433 powerplug-control transmitters | LAN\\ mqtt.realraum.at\\ DNS |  {{:roomauto:rf433_yamahastereo_kiosk.realraum.at.jpg?200|}} |
| yamahastereo | [[intern:ip-adressen|kiosk.realraum.at]]| Action Destionation to control the YamahaStereoReceiver/Amplifier in LoTHR | LAN\\ mqtt.realraum.at\\ DNS |  {{:roomauto:rf433_yamahastereo_kiosk.realraum.at.jpg?200|}} |
| ircchanbot | [[intern:ip-adressen|dhcp-12.realraum.at]] | IRC Bot running on verr's raspberryPI2 (thinkpi) on the shelf next to the beamer| LAN\\ mqtt.realraum.at\\ Internet |  {{:roomauto:ircbot_thinkpi.realraum.at.jpg?200|}} |
| r3LEDPipe | [[http://gw.realraum.at/cgi-bin/reportdhcp.pl|dhcp:NODE-ABE95]], usually 192.168.127.151 | LEDs on top of Pipe in LoTHR | r3WIFI\\ provides telnet\\ needs DHCP\\ DNS\\ mqtt.realraum.at |  {{:roomauto:r3lothrpipeleds.jpg?200|}} | 
| ceiling1-6  | [[intern:ip-adressen|ceiling*.mgmt.realraum.at]] | RGB+CW+WW controllable ceilinglights in LoTHR | mgmtWIFI with r3WIFI as fallback\\ mqtt.realraum.at\\ DNS\\ provides telnet |  {{:roomauto:ceilingn_ceilingn.mgmt.realraum.at.jpg?200|}} |
| flooddoor  | [[intern:ip-adressen|flooddoor.mgmt.realraum.at]] | RGB+CW+WW controllable light above entrance in LoTHR | mgmtWIFI with r3WIFI as fallback\\ mqtt.realraum.at\\ DNS\\ provides telnet |  {{:roomauto:flooddoor_flooddoor.mgmt.realraum.at.jpg?200|}} |
| abwasch | [[intern:ip-adressen|abwasch.mgmt.realraum.at]] | RGB+WW+UV controllable LED strips for LoTHR Abwasch | mgmtWIFI with r3WIFI as fallback\\ mqtt.realraum.at\\ DNS\\ provides telnet |  {{:roomauto:abwasch_abwasch.mgmt.realraum.at.jpg?200|}} |
| mashaesp | [[intern:ip-adressen|mashaesp.mgmt.realraum.at]] | planned but currently disabled movement sensor to combat people leaving the lights on in MaSha  | mgmtWIFI\\ mqtt.realraum.at\\ DNS | |
| couchred | [[http://gw.realraum.at/cgi-bin/reportdhcp.pl|dhcp:couchred-8128]] | SonOff S20 PowerPlug controlling the "Ducks" | r3WIFI\\ mqtt.realraum.at\\ needs DHCP\\ DNS\\ provides http|  {{:roomauto:couchred.jpg?200|}} |
| printerbone | drucker.realraum.at | BeagleBoneGreen managing printer power | mqtt.realraum.at \\ needs DNS\\ provides cups | {{:roomauto:printerbonegreen1-230x300.jpg?200&direct|}} |
| lothrboiler | [[http://gw.realraum.at/cgi-bin/reportdhcp.pl|dhcp:"lothrboiler-6135]] | SonOff Pow Relay controlling power to the warm water boiler in LoTHR| r3WIFI\\ mqtt.realraum.at\\ needs DHCP\\ DNS\\ provides http |  {{:roomauto:lothrboiler.jpg?200|}} |

==== 2nd level topics and payload types  ====

see e.g. [[https://github.com/realraum/door_and_sensors/blob/master/r3events/basicevents.go | basicevents]] to get a feel for a payload message structure.

Ts stands for timestamp and should be a int64 value of seconds since the epoch at the time the event occured.

^ 2nd Level Topic ^ Payload Type ^ Payload Type Format ^
^ Sensor Messages ^^
| lock | JSON Object | {"Locked":bool, "Ts":int64} |
| ajar | JSON Object | {"Shut":bool, "Ts":int64} |
| cmdevt | JSON Object | {"Command":string, "Using":string ("Card","Button","ssh",...), "Who":string, "Ts":int64} |
| problemevt | JSON Object | {"Severity":int, "Problem":string "Ts":int64} |
| manuallockmovement | JSON Object | {"Ts":int64} |
| rawfwlines | string | |
| boredoombuttonpressed |JSON Object | {"Ts":int64} |
| temperature |JSON Object | {"Location":string, "Value":float64 (°C), "Ts":int64} |
| voltage | JSON Object | {"Location":string, "Value":float64 (V), "Min":float64 (V, optional),"Max":float64 (V, optional),"Percent":float64 (%, optional), "Ts":int64} |
| overtemp | JSON Object | {"Location":string, "Value":float64 , "Threshold":float64, "Ts":int64} |
| illumination |JSON Object | {"Location":string, "Value":int64 , "Ts":int64} |
| dust | JSON Object | {"Location":string, "Value":int64 , "Ts":int64} |
| relhumidity | JSON Object | {"Location":string, "Percent":float64 , "Ts":int} |
| barometer   | JSON Object | {"Location":string, "HPa":float64, "Ts":int} |
| gasalert | JSON Object | {"Ts":int64} |
| powerloss | JSON Object | {"OnBattery":bool, PercentBattery:float, LineVoltage: float, LoadPercent: float, "Ts":int} |
| NetDHCPACK | JSON Object | {"Mac":string, "IP":string, "Name":string, "Ts":int} **TODO** |
| NetGWStatUpdate | JSON Object | {**TODO**, "Ts":int64} |
| cardpresent | JSON Object | {"IsHot":bool, "Who":string(name of user), "Ts":int} |
| foodorderrequest  | JSON Object | {"Who":string, "Preference":string, "Ts":int} |
| foodorderinvite   | JSON Object | {"Who":string, "Where":string, "URL":string (http or phone), "Ts":int64} |
| foodordereta   | JSON Object | {"TSofInvite":int64, "ETA":int64, "Ts":int} |
^ Meta Events ^^
| presence | JSON Object | {"Present":bool, "Ts":int64} |
| realmovement | JSON Object | {"Movement":bool, "Confidence":uint8, "Ts":int} **largely useless** |
| overtemp | JSON Object | {"Location":string, "Value":float, "Threshold":float, "Ts":int} |
| sensorlost | JSON Object | {"Topic":string, "LastSeen":int, "UsualInterval":int64, "Ts":int} |
| duskordawn | JSON Object | {"Event":[[https://github.com/realraum/door_and_sensors/blob/master/r3-metaevt-maker/duskordawn.go | string]],"HaveSunlight":bool, "Ts":int} |
| TempSensorSpike | JSON Object | {"Location":string, "Value":float64, "Ts":int} |
| DustSensorSpike | JSON Object | {"Location":string, "Value":int64, "Ts":int} |
^ Action Requests ^^
| sendcode3byte | JSON Object | {"Code":[3]byte, "Ts":int64} |
| setdelay | JSON Object | {"Location":string, "DelayMs":int64, "Ts":int64} |
| ircmd | JSON Object | {"Cmd":[[https://github.com/realraum/door_and_sensors/blob/master/scripts/arduinosensors.py |string]], "Ts":int64} |
| pattern | JSON Object | {"pattern":string, "arg": optional argument for pattern, "arg1": opt, "brightness":0..100, "hue":-1..255, "speed":0..255} |
| restart |  | |
| light | JSON Object | [[https://github.com/realraum/deckenlichtschalter/tree/master/h801/mqttConfigurablePWMFW#topic-actionceilingalllight|see schema]] |
| name | String | 0|1|on|off |
realraum Graz, Brockmanngasse 15, 8010 Graz, realraum - Verein für Technik in Kultur und Gesellschaft