Table of Contents

Use Cleaning Filament when changing to a filament with a different extrusion temperature.

Otherwise lower-temp filament will charcoal inside the hotend at higher temperatures which can obsctruct the hot-end and create back-pressure and can be almost impossible to clean out.

The Prusa MK4 provided by mkg

Printing on the Original Prusa MK4, provided by member mkg, has the following costs:

For convenience, just pay 10€ per every 1kg of filament you get for printing in realraum. Payments are to be put into the cylindrical container next to the 3D printer in LoTHR labeled something like “3D-Druck Spende”.

mkg: PSA. If you use your own filament it’s 1ct/g, using mkg’s filament 4ct/g total Just ask mkg if unclear.
→ source (protocol from the Mitgliederabend of 2024-07-08, internal)

3D Printing Materials aka Filament in realraum

See the Lulzbot Filament Guide on print-settings for various materials.

See also the Lulzbot Cura Profiles Page

Cost and Prices

for members

in gramm

in m for 3mm Filament (Lulzbot)

in m for 1.75mm Filament (everything else)

for guests

in gramm

in m for 3mm Filament (Lulzbot)

in m for 1.75mm Filament (everything else)